work
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
単語検索
|
最終更新
|
ヘルプ
|
ログイン
]
開始行:
#contents
Central European Journal of Chemistry
December 2008, Volume 6, Issue 4, pp 555–561
Density and temperature effect on hydrogen-bonded clusters in water - MD simulation study
*tex [#ya75ddfd]
Eyring's theory
#mathjax(text-align: left;color: red)
\[
\eta {\it v} = \left( \eta {\it v} \right)^{\rm id} \exp(\frac{{\it \sigma\Delta G^{\rm ex}}}{RT})\]
*VMD [#ua1db3a9]
pbc set {40.8048470927113 40.8048470927113 40.8048470927113} -all -molid top
pbc box -center origin
Keysightがagilent製のデータロガーのサポートをするようになってから、ソフトウェアの設定方法が変わった。
初めに、Keysight Connection Expertにより接続設定する必要がある。
USB‐RS232C(USB-CVRS9)を使用した時の記録。
RS232Cを利用した場合、Connection Expertでは自動認識されないため、手動で設定する必要がある。
まずは本体(34970A)のインターフェース設定。
Shift→interface
9600 BAUD
NONE, 8 BITS
FLOW NONE
次にConnection Expertの
Manual Configuration→Add New Instrument/InterfacesでRS232Cの接続を構築
VISA Interface ID: ASRL1
SICL Interface ID: COM1
Logical Unit: 1
Configure Serial Properties:
Baud Rate: 9600
Stop Bits: 1
Data Size: 8
Parity: NONE
Flow Contral: NONE
SRQ Line: RI
Auto-Identify This Insturmentにチェック
Verify Connection:
Test This VISA Address をクリックしして、接続がうまくいっていれば、
Verified hewlett-packard, 34970a,*asrl1::instr
と表示されるはず。
これが確認された後で、InstrumentsでRescanをかけると、データロガーが認識される。
終了行:
#contents
Central European Journal of Chemistry
December 2008, Volume 6, Issue 4, pp 555–561
Density and temperature effect on hydrogen-bonded clusters in water - MD simulation study
*tex [#ya75ddfd]
Eyring's theory
#mathjax(text-align: left;color: red)
\[
\eta {\it v} = \left( \eta {\it v} \right)^{\rm id} \exp(\frac{{\it \sigma\Delta G^{\rm ex}}}{RT})\]
*VMD [#ua1db3a9]
pbc set {40.8048470927113 40.8048470927113 40.8048470927113} -all -molid top
pbc box -center origin
Keysightがagilent製のデータロガーのサポートをするようになってから、ソフトウェアの設定方法が変わった。
初めに、Keysight Connection Expertにより接続設定する必要がある。
USB‐RS232C(USB-CVRS9)を使用した時の記録。
RS232Cを利用した場合、Connection Expertでは自動認識されないため、手動で設定する必要がある。
まずは本体(34970A)のインターフェース設定。
Shift→interface
9600 BAUD
NONE, 8 BITS
FLOW NONE
次にConnection Expertの
Manual Configuration→Add New Instrument/InterfacesでRS232Cの接続を構築
VISA Interface ID: ASRL1
SICL Interface ID: COM1
Logical Unit: 1
Configure Serial Properties:
Baud Rate: 9600
Stop Bits: 1
Data Size: 8
Parity: NONE
Flow Contral: NONE
SRQ Line: RI
Auto-Identify This Insturmentにチェック
Verify Connection:
Test This VISA Address をクリックしして、接続がうまくいっていれば、
Verified hewlett-packard, 34970a,*asrl1::instr
と表示されるはず。
これが確認された後で、InstrumentsでRescanをかけると、データロガーが認識される。
ページ名: